Mobile Phone
+86 15954170522
E-mail
ywb@zysst.com

Factory wholesale ASTM/Gr1 Corrosion Resistant Titanium Alloy Tubes for Condenser and Evaporator From Chinese Suppliers

Short Description:

Application: industrial, medical, military industry

Technology: cold rolling

Grades: GR1

Shape: round

Size 1: thickness 1-3 mm

Specification: thickness 0.05-0.3mm


Product Detail

Product Tags

It truly is our responsibility to fulfill your requirements and successfully provide you. Your fulfillment is our best reward. We’re seeking forward in your check out for joint development for Factory wholesale ASTM/Gr1 Corrosion Resistant Titanium Alloy Tubes for Condenser and Evaporator From Chinese Suppliers, We guaranteed good quality, if consumers were not satisfied with the products’ good quality, you can return inside of 7days with their original states.
It truly is our responsibility to fulfill your requirements and successfully provide you. Your fulfillment is our best reward. We’re seeking forward in your check out for joint development for China Titanium Product and Pipe, We’ve got been perfectly devoted to the design, R&D, manufacture, sale and service of hair products during 10 years of development. We now have introduced and are making full use of internationally advanced technology and equipment, with advantages of skilled workers. “Dedicated to providing reliable customer service” is our aim. We’ve been sincerely looking forward to establishing business relationships with friends from at home and abroad.

TC2 Titanium Alloy Aheet Plate,An alloy based on titanium with other elements added. There are two kinds of homogenous crystals in titanium: α titanium with dense hexagonal structure is below 882℃, and β titanium with body center cube is above 882℃.

Technical requirements:

1. The chemical composition of titanium and titanium alloy plate shall comply with the provisions of GB/T 3620.

2. In the case of reinspection, the allowable deviation of chemical composition shall comply with the provisions of GB/T 3620.

a. the allowable deviation of the thickness of the plate should comply with the provisions of Table 1.

b. the allowable deviation of plate width and length should comply with the provisions of Table 2.

c. the corners of the plate should be cut into right angles as far as possible. The deviation should not exceed the length and width of the sheet

TC2 Titanium Alloy Aheet Plate, The Production Specification

T 0.5-1.0mm × W1000mm × L 2000-3500mm

T 1.0-5.0mm × W1000-1500mm × L 2000-3500mm

T 5.0- 30mm × W1000-2500mm × L 3000-6000mm

T 30- 80mm × W1000mm × L 2000mm

TC2 Titanium Alloy Aheet Plate, Production Status

Hot working state (R) Cold working state (Y) Annealing state (M)

TC2 Titanium Alloy Aheet Plate, Reference Standard

1: GB 228 Metal tensile test method

2: GB/T 3620.1 Titanium and titanium alloy grades and chemical composition

3: GB/T3620.2 Titanium and titanium alloy processed products chemical composition and composition allowable deviation

4: GB 4698 Sea surface method for chemical analysis of titanium, titanium and ferroalloys

TC2 Titanium Alloy Aheet Plate, The Technical Requirements

1: The chemical composition of titanium and titanium alloy plate shall comply with the provisions of GB/T 3620.1. In the case of reinspection, the allowable deviation of chemical composition shall comply with the provisions of GB/T 3620.2.

2: The allowable deviation of the thickness of the plate should comply with the provisions of Table 1.

3: The allowable deviation of plate width and length should comply with the provisions of Table 2.

4: The corners of the plate should be cut into right angles as far as possible. The deviation should not exceed the length and width of the sheet

Alloying

TC2 Titanium Alloy Aheet Plate,An alloy based on titanium with other elements added. There are two kinds of homogenous crystals in titanium: α titanium with dense hexagonal structure is below 882℃, and β titanium with body center cube is above 882℃.

(1) Alloying elements can be divided into three categories according to their effect on phase transition temperature:

α -stable elements, such as aluminum, carbon, oxygen and nitrogen, stabilize α phase and increase phase transition temperature. Aluminum is the main alloying element of titanium alloy, which has obvious effect on improving the strength of alloy at room temperature and high temperature, reducing the specific gravity and increasing the elastic modulus.

(2) β -stable elements can be divided into two types: isocrystalline and eutectoid. Products made of titanium alloy

The former has molybdenum, niobium, vanadium and so on; The latter has chromium, manganese, copper, iron, silicon and so on.

(3) The elements that have little effect on phase transition temperature are neutral elements, such as zirconium and tin.

Oxygen, nitrogen, carbon and hydrogen are the main impurities in titanium alloys. The solubility of oxygen and nitrogen in the α phase is greater, which has a significant strengthening effect on the titanium alloy, but decreases the plasticity. The content of oxygen and nitrogen in titanium is usually below 0.15 ~ 0.2% and 0.04 ~ 0.05%, respectively. Hydrogen has very little solubility in the α phase, and too much hydrogen dissolved in titanium alloys produces hydrides, which make the alloy brittle. Hydrogen content in titanium alloy is usually controlled below 0.015%. The dissolution of hydrogen in titanium is reversible and can be removed by vacuum annealing.

Chemical Composition 

Grade N C H Fe O Al V Pa Mo Ni Ti
Gr1 0.03 0.08 0.015 0.2 0.18 / / / / / Bal
Gr2 0.03 0.08 0.015 0.3 0.25 / / / / / Bal
Gr3 0.05 0.08 0.015 0.3 0.35 / / / / / Bal
Gr4 0.05 0.08 0.015 0.5 0.4 / / / / / Bal
Gr5 0.05 0.08 0.015 0.4 0.2 5.5-6.75 3.5-4.5 / / / Bal
Gr7 0.03 0.08 0.015 0.3 0.25 / / 0.12-0.25 / / Bal
Gr9 0.03 0.08 0.015 0.25 0.15 2.5-3.5 2.0-3.0 / / / Bal
Gr12 0.03 0.08 0.015 0.3 0.25 / / / 0.2-0.4 0.6-0.9 Bal

Tensile Strength

Grade Elongation(%) Tensile Strength (Min) Yield Strength (Min)
ksi Mpa ksi Mpa
Gr1 24 35 240 20 138
Gr2 20 50 345 40 275
Gr3 18 65 450 55 380
Gr4 15 80 550 70 483
Gr5 10 130 895 120 828
Gr7 20 50 345 40 275
Gr9 15 90 620 70 438
Gr12 18 70 438 50 345

Titanium And Alloy Products

Product name Specifications
Titanium Rod & Bar & Ingots Ф3mm~Ф1020mm,the maximum weight is up to 12t
Titanium Slab (80~400)mm×(~1500)mm×(~2600)mm
Titanium Forgings Weight per piece≤2000kg
Titanium Hot-rolled plates (4~100)mm×(800~2600)mm×(2000~12000)mm
Titanium Cold-rolled Sheet (0.01~4.0)mm×(800~1560)mm×( ~6000) mm
Titanium Foil / Strips (0.01~2.0)mm×(800~1560)mm×L
Titanium Tubes / Pipes Ф(3~114)mm×( 0.2~5)mm × (~15000)mm
Standards GB,GJB,ASTM,AMS,BS,DIN,DMS,JIS,ГОСт
Titanium Grade
  • GR1,GR2,GR3,GR5,GR7,GR12
  • BT1-00,BT1-0,BT1-2
  • TA0,TA2,TA3,TA5,TA6,TA7,TA9,TA10,TB2,TC1,TC2,TC3,TC4

Product Display

TC2-Titanium-Alloy-Aheet-Plate-(1)
TC2-Titanium-Alloy-Aheet-Plate-(3)
TC2-Titanium-Alloy-Aheet-Plate-(2)
It truly is our responsibility to fulfill your requirements and successfully provide you. Your fulfillment is our best reward. We’re seeking forward in your check out for joint development for Factory wholesale ASTM/Gr1 Corrosion Resistant Titanium Alloy Tubes for Condenser and Evaporator From Chinese Suppliers, We guaranteed good quality, if consumers were not satisfied with the products’ good quality, you can return inside of 7days with their original states.
Factory wholesale China Titanium Product and Pipe, We’ve got been perfectly devoted to the design, R&D, manufacture, sale and service of hair products during 10 years of development. We now have introduced and are making full use of internationally advanced technology and equipment, with advantages of skilled workers. “Dedicated to providing reliable customer service” is our aim. We’ve been sincerely looking forward to establishing business relationships with friends from at home and abroad.


  • Previous:
  • Next: